Sources

Inside the Sources tab in the Intelie Live Collectors tab is possible to add sources for an online Collector with SSL enabled, a button will be available at the bottom of sources list as shown below:

List of sources configured for a Collector

When clicking the Create new source button, there's a form that should be filled with sources information, like name, service company, protocol, mode, rig name and some store access information. The protocols available are: WITSML (versions 1.3.1.1, 1.4.1.1 and 2.0), WITS, OPC-DA, OPC-UA, Modbus, MQTT, CSV and RAW (JSON).

List of protocols available to configure a new source

On the Access section, some protocols (example: WITSML and OPC) support the Test Access button to check the availability.

After saving the new source, you may wait for a while as the collector sources list is updated, then you can access more features for the created source by clicking on it's name.

Choose a source to edit, then new tabs will display if the protocol supports

On the source page, the configurations tab will allow you to update the configured event type and store access information, saving those changes may take a while to update as well.

Dependent upon the protocol type, additional tabs can be displayed. For example, sources for WITSML allow the configuration of requests, backlog sync and object explorer.