---
description: >-
  Depth unit is defined by the identified hole depth channel and it is treated
  as the index of depth values.
---

# Depth unit changes

After identifying the hole depth channel using the [Standard Identifiers](../../administration/standard-identifiers), display units configured to it will also convert the index of the current chart, example:\


![Hole depth identification](https://2579444069-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-Lno5CP_Y4IUtBWLlJZl%2F-MB-VQTNlyKkX-PoPHOk%2F-MB-Ynq8r_YiCcbICGzq%2Fimage.png?alt=media\&token=a9d7a78b-93e5-4835-a13f-b9bf19f360fd)

Notice that the screenshot below does not have unit set applied

![No unit set](https://2579444069-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-Lno5CP_Y4IUtBWLlJZl%2F-MB-VQTNlyKkX-PoPHOk%2F-MB-Z746QCYabxOc6M99%2Fimage.png?alt=media\&token=95185932-8b37-4064-bf3f-287e95c297bb)

Same data, with display unit applied, note that hole depth was converted from **meter** to **foot**.\


![Hole depth with applied "ft" display unit](https://2579444069-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-Lno5CP_Y4IUtBWLlJZl%2F-MB-VQTNlyKkX-PoPHOk%2F-MB-ZkP0TGaiNyRJBUoM%2Fimage.png?alt=media\&token=b25add87-bc23-449d-90a4-07e3943d2562)
